kreg jig k4 pocket hole system
Buy Low Price From Here Now
The Kreg Jig K4 Pocket-Hole System is the perfect choice for DIYers and anyone new to pocket-screw joinery. Whether youre building your first set of garage storage shelves or making simple repairs around the house, the Kreg Jig can help you finish the job in less time and with far less effort than you ever thought possible. Its simple design gives you the confidence to start the project, and with joints as easy as Drill. Drive. Done! youll actually want to finish it. Includes everything you need to get started: stepped drill bit, stop collar, 6" square drive bit, starter screw and plug sets, SkillBuilder DVD, and quick-start guide. Carrying case also included.
Readmore
Technical Details
- 3-Hole drill guide for pocket holes
- Large clamping recess to secure your jig
- Removable drill guide guarantees you'll have the right tool
- Drill guide block doubles as a repair tool
- Requires no glue, no complicated math, and no small army of clamps
See more technical details
2010-02-24
By Chaditude (Alviso, CA)
Man, I like this jig. Coming into woodworking from a more mechanical viewpoint, I was always looking for an easier way to join two pieces in a small shop where I don't have a lot of clamps hanging around for gluing. This is it. So simple and so fast, I'm enjoying making more complicated pieces than I ever thought I would until I had a bigger shop. Like an apothecary cabinet, next on the list.
2010-02-16
By Stormrider (Seattle WA)
Kreg almost got it right. This is an excellent tool for almost any kind of joinery. In my experience it is far superior to biscuits or dowels. It really is one of those tools that performs as advertised.
The problem comes in when you want customer support. In our area the dealers who are listed as carrying parts such a plugs for the pocket holes, drill bits, drivers, etc. Have little or nothing from Kreg, (i.e. Lowe's).
Kreg customer support is non-existent. When we called Kreg's order department they refused to help us. Instead they insisted we buy from a local supplier or buy on-line from Amazon; they insisted Amazon's prices were cheaper than buying direct from Kreg, and that Amazon gave free shipping.
Amazon's prices were almost twice what Kreg advertised, and the shipping was free only if you order in bulk. When we explained to customer service that Kreg's advertised process and shipping were less than Amazon's, Kreg continued to argue with us and insisted we buy from Amazon.
I have to wonder why Kreg even has a contact point to order from Kreg, when Kreg won't sell anything direct. I am absolutely mind-boggled that they refuse to do business with a customer who shows up, money in hand, who wants to do business with them. The only thing I can figure is that they have some sort of arrangement with Amazon and their dealers that they won't sell by mail to anyone who lives in the same area as a dealer, or anyplace where Amazon will ship to. This only works if the dealer actually stocks a good selection of Kreg products, or you have no problem paying the premium prices Amazon charges (almost twice what Kreg advertised)and don't mind the waiting time involved with the mail.
If you live close to a dealer with a good supply of Kreg parts and accessories, I cannot recommend this product too highly. It really does work.
If you do not have a good dealer close by, I recommend you order a good resupply of everything and accept the fact you will be paying a premium to use the tool, and that there may be times when you may not be able to use it while you wait for supplies to reach you via mail.
Fortunately the tool appears to be well made, because based on my experience with customer service, I have serious doubts about Kreg's willingness to honor their warranty.
2010-02-16
By E. J. de Cuba (Melbourne, FL United States)
This thing does the work of many other tools combined. It does it as advertised and the results are impressive. Haven't done large projects yet but would be easy and fast seeing that the system is itself everything you need. In some instances I used some drywall screws and a long phillips-bit (being out of Kreg-screws), well results are the same and they are still in place holding the project together. Just make sure to plan your drilling since the holes will be very visible if you do not hide them. The included DVD won't tell you a lot (it's just advertisement) but if you're starting out it'll have some tips.
2010-02-09
By G. Smith
Fast, easy, almost fool-proof, and makes joints that are scary strong. The only way to make face frames or other connections where the joint won't show. The one caveat I will make is that screws can make a difference. If you buy cheap, off-brand screws, the chances of splitting and other problems greatly increases. Buy the Kreg, self-tapping screws in bulk and save yourself some heartache.
2010-02-07
By Carlgo (Carmel Valley, CA)
I got the K4 system because it seemed like it would work and I already had a similar hold-down clamp. Saved $40 for what I needed. I ended up screwing the unit to a wooden work bench, rather than using the clamp anyway and that is a good way to do it, probably the best.
The dust collection was hooked up to my Fein vac that turns on when the drill is on. Not even a scrap of dust. Totally clean. See my Fein vac review.
Set-up is very easy per the nice simple little instruction pamphlet and the very professional DVD that is included.
You obviously have to use this tool correctly to get the great results. This means getting the right screws for the job. There are all sorts of different screw options from Kreg. I got the course ones for soft wood and suffered no splits or other problems. The screws seem to be of the highest quality, good for other projects as well.
I was kind of worried that I would have to come up with some kind of a jig to hold my wood at a right angle. I found this is not necessary. What you have to do is make sure the ends are exactly 90 degrees because that end will be drawn very tight to the other board. If it is off a degree, the screws will set it one degree off, if they are perfect, then it will be perfectly perpendicular. So, just take the time to make sure your crosscuts are perfectly accurate. This joinery system is very hard to fudge, it is very unforgiving of errors.
The bit has that hard feel to it, sharp and probably not meant to take much in the way of sharp impacts. I drilled down at a modest rate so as to not break anything and nothing did break. There is a collar that you adjust for the depth of wood. Unlike a set of collars I bought for general use, the Kreg one sets securely and doesn't slide on you. Again, I took care not to bear down on the drill too hard because if the collar slips, you would have problems.
You do have to hold down the two pieces of wood, right at the joint with a clamp. This always keeps the pieces flush with each other. Don't skip this step, even if you have to buy that long clamp, expensive but useful for a lot of projects. Push the pieces close together before you set the screws. The wood pulls tightly together, but don't get too lazy. It creates a little misalignment if you get too sloppy.
Frankly, the screws seem so tight that glue seems unnecessary. Doesn't hurt, but I wouldn't bother except perhaps on a table top.
The Kreg K4 is touted as the universal joining method and it can work that way. As somewhat of a traditionalist, I would still glue up a table top and I will still use mortise and tenons on many tables projects simply because that kind of work is expected. One of the recommend uses is to screw down a table top to its frame. I do not like that idea and recommend sliding blocks and such to let the top expand and contract independently from the frame.
Even so, there are still thousands of interesting projects that the Kreg system does just perfectly and you will be able to use it forever, really. I see nothing about this that might be obsoleted, but if I was using it commercially where time was money I would buy a spare bit just in case. Note that after hundreds of holes my bit seems perfect and the hard metal inserts in the jig are as good as new. If I was alternating drilling and screwing with one drill, I would get that quick-change bit system Kreg offers. In my case I practiced on one piece and was so secure with the process that I went into mass production mode and didn't switch back and forth.
I made some utility cabinet drawer frames that were essentially knock-downs. Just marked the parts, unscrewed things and was able to carry it all in my truck. Sometimes this is a very handy way to do things. You don't lose any strength, can carry the flat knocked-down sections up into building by yourself...all sorts of advantages.
Kreg doesn't give anything away! It is all quite Euro-spendy, but I cannot fault the design or materials at all. This is a tool system you will use for a very long time and it will save you a lot of time and provide superior results on many projects and repairs. A high quality product, well-designed and thought out. Happy to hand out five full stars.
Images Product
Buy Kreg Jig K4 Pocket Hole System Now
Post a Comment